BMW F020 – SP-DATEN Update files – here.

BMW F010 – SP-DATEN Update files – here.

BMW F001 – SP-DATEN Update files – here.

BMW MINI R56 – SP-DATEN Update files – here.

BMW MINI R50 – SP-DATEN Update files – here.These files are very useful if you would like to update your cars modules to the latest firmware/coding using BMW Standard toolsįor the latest on your model, please refer to the update matrix here SP-DATEN (V68 2021 Version – Module Firmware/Coding updates) We have created a very detailed walkthrough guide on how to install, configure and get NCS-Expert running can be found here (Windows 7) here (Windows 10) and here (Windows 11) The process takes only seconds.Access to the direct download of NCS-Expert/ INPA and bonus coding files can be found here Confirm “JOBNAME” in the middle groupbox says “SG_CODIEREN”.In the “Choose job” dialog box, select “SG_CODIEREN” and click “OK”.If “JOBNAME” in the middle groupbox already reads “SG_CODIEREN”, skip the following steps andjump to 16.Make sure the “FSW_PSW.MAN” manipulation file is for the same module. In the “Choose ECU” dialog box, select the desired module and click “OK”.The middle groupbox now shows the available modules and default jobname. After a short moment, the top groupbox should now show information regarding your car.In the “Choose ECU” dialog box, select one of the presented modules (for example “CAS”, “EWS” or”EKM”) and click “OK”.In the “Choose CHASSIS” dialog box, select your chassis and click “OK”.Nothing much happens, but you’ll notice some of the buttons on the bottom now have labels. In the “Choose profile” dialog box, select “NCS Dummy profile” and click “OK”.From the “File” menu, choose “Load Profil”.At this moment no profile is loaded, so the screen is quite empty. If NCS Expert was still open after reading the trace file, start from step 12.īMW Coding/Flashing/Progrmming PDF+Video Guide Then follow the instructions below to recode the module. To do so,read a trace file from the module you wish to change the coding of, load it in NCS Dummy, make the desired changes in the graphical trace editor and export the FSW_PSW.MAN trace manipulation file. The most common way of coding modules with NCS Expert is through FSW/PSW manipulation.

Ncs expert missing profiles